} Transformer Requirements for EV Charging Stations-Varelen Electric
Varelen Electric

Transformer Considerations for EV Charging Infrastructure

2026-10-14
Bella Lee

 

1. Understanding EV Charging Loads and Transformer Requirements

Different EV Chargers Create Different Transformer Demands

Not all EV charging systems place the same requirements on transformers.

The transformer selection depends mainly on:

The main EV charging categories include:

Charging Type Typical Power Range Transformer Consideration
Level 1 AC Charging 1–2 kW Similar to residential loads
Level 2 AC Charging 7–22 kW Requires reliable low-voltage distribution
DC Fast Charging 50–350+ kW Requires dedicated high-capacity transformer solutions

Level 2 charging is commonly used in workplaces, commercial buildings, and residential developments. DC fast charging is mainly installed at highway stations, fleet depots, logistics centers, and public charging hubs.

Large DC charging stations can create concentrated electrical demand that exceeds the capacity of existing distribution transformers, requiring dedicated transformer upgrades. 

 

2. Transformer Sizing for EV Charging Stations

Size the Transformer Based on Actual AC Input Demand

One of the most common mistakes in EV charging projects is selecting a transformer based only on the charger output rating.

For example:

A 350 kW DC fast charger does not mean the transformer only needs to provide 350 kW. The transformer must supply:

The basic transformer sizing process includes:

Step 1: Calculate Total Connected Load

Add the rated input power of all charging equipment.

Example:

10 × 150 kW DC chargers:

150 kW × 10 = 1500 kW connected load

 

Step 2: Consider Load Diversity

Not every charger operates at maximum power at the same time.

Factors include:

A fleet charging station may have a higher coincidence factor than a shopping mall charging area because vehicles often charge during limited time windows.

 

Step 3: Convert Load to Transformer kVA

Transformer capacity is normally specified in kVA.

Formula:

Transformer kVA = Load kW ÷ Power Factor

Example:

1500 kW load at 0.95 power factor:

1500 ÷ 0.95 ≈ 1580 kVA

Additional margin is usually considered for:

Proper sizing avoids overheating, voltage drops, and expensive future upgrades.

 

3. Harmonic Considerations for EV Charging Transformers

Why Harmonics Matter in EV Charging Systems

EV chargers use power electronic converters to transform AC power into DC battery charging power.

These converters can introduce harmonic currents into the electrical network.

Harmonics may cause:

Therefore, a standard distribution transformer may not always be suitable for high-power EV charging applications.

Recommended Transformer Design Features for EV Charging

Depending on project requirements, EV charging transformers may include:

1. Harmonic-Rated Windings

Transformers designed for nonlinear loads can better withstand additional heating caused by harmonic currents.

2. Increased Thermal Margin

Additional cooling capacity helps maintain acceptable winding temperatures during peak charging periods.

3. Low-Loss Core Design

Low-loss transformer cores reduce operating costs, especially for charging stations operating 24/7.

4. Power Quality Compatibility

Transformer design should consider:

 

 

4. Choosing the Right Transformer Type for EV Charging Infrastructure

 

Dry-Type Transformers for Indoor EV Charging Applications

Dry-type transformers are commonly used when fire safety and environmental protection are priorities.

Advantages:

Typical applications:

pad mounted transformer for EV charging stations is one of the most common solutions for outdoor charging applications.

Advantages include:

Typical applications:

Highway charging stations

Commercial parking areas

Fleet charging depots

Renewable energy charging parks

Transformer for EV Charging Station: Key Specifications

 

When specifying a transformer for an EV charging project, the procurement specification should normally include:

Specification Typical Consideration
Transformer type Oil-immersed or dry-type
Rated capacity Based on calculated maximum demand
Primary voltage Utility-specific, e.g. 11 kV, 13.8 kV
Secondary voltage Charger-specific, e.g. 400 V, 415 V, 480 V
Frequency 50 Hz or 60 Hz
Phase Three-phase for most commercial charging hubs
Cooling ONAN, ONAF, or appropriate dry-type cooling
Impedance Selected according to system fault level and voltage regulation
Harmonics Evaluate charger-generated harmonic currents
Tap changer Depending on utility voltage variation
Enclosure Indoor, outdoor, pad-mounted, etc.
Standards Applicable IEC, IEEE, utility, and local requirements

The EV charging equipment itself is governed by the IEC 61851 series; IEC 60364-7-722 specifically addresses electrical installations supplying EVs and circuits allowing electricity to flow back from EVs.

 

5. Voltage Selection and Grid Connection Considerations

Transformer voltage configuration is another important factor in EV charging projects.

Engineers must consider:

Common transformer configurations include:

Primary Voltage Secondary Voltage Application
10–20 kV 400/480 V Commercial charging stations
20–35 kV 400/480 V Large charging hubs
Utility MV Customized LV Fleet and industrial applications

 

6. Future Expansion and Smart Energy Management

EV charging demand will continue increasing. A transformer designed only for today's requirements may become a limitation in the future.

A reliable EV charging transformer strategy should consider:

Future Capacity Expansion

Reserve capacity allows:

Smart Charging Systems

Energy management systems can control charging schedules and reduce peak demand.

Benefits include:

Renewable Energy Integration

Many EV charging projects combine:

 

 

 

The ideal EV charging infrastructure transformer should provide:

Whether the project requires a pad-mounted transformer for EV charging stations, a dry-type transformer for indoor applications, or a high-capacity oil-immersed transformer for fast-charging hubs, early transformer planning helps ensure safe, efficient, and scalable EV power systems.

 

Frequently Asked Questions (FAQ)

Q1, Can a standard distribution transformer be used for EV charging?

Small Level 2 charging installations may use standard distribution transformers. However, large DC fast charging systems often require transformers designed for nonlinear loads, harmonics, and high cycling conditions.

 

Q2, Why do EV chargers create transformer problems?

EV chargers use power electronic converters that introduce harmonic currents and create rapidly changing loads. These conditions can increase transformer heating and affect service life if not properly considered.

 

Q3, What are the main keywords for EV charging transformer projects?

Important search terms include:

Prev:Varelen to Showcase Transformer Solutions at the 140th Canton Fair Next:Dry-type transformers for charging stations

Follow Us